Filter
Top Products
5
using the cutting plates
s
hredding plate
C
ut pieces of food to fit the feed tube. Fill the tube almost to the
top and push down using the pusher with an even pressure
whilst the machine is running.
L
onger shreds can be obtained by stacking pieces horizontally in
the feed tube eg carrot.
slicing plate
I
f necessary cut food to fit the feed tube. Core foods such as
a
pples and peppers. Pack the food in an upright position in the
feed tube. The height should be slightly shorter than the feed
tube. Using the pusher, push down with an even pressure whilst
t
he machine is running.
hints
●
Use fresh ingredients.
●
D
on’t cut food up too small. Fill the feed tube fairly full, this
prevents food from slipping sideways during processing.
●
When slicing or shredding: food placed upright comes out
shorter than food placed horizontally.
●
After using a cutting plate there will always be a small amount of
waste on the plate or in the food.
●
Do not allow food to build up to the underside of the plate -
empty regularly.
●
Push food down the feed tube using an even pressure.
maxi blend canopy
When blending, use the maxi blend canopy in conjunction with
the knife blade. It allows you to increase the liquid processing
capacity of the bowl and improve the chopping performance of
the blade.
1 Place the canopy into the bowl over the knife blade - do not
push down ᕥ.
2 Fit the lid ᕦ
care & cleaning
●
Always switch off and unplug before cleaning.
●
Handle blades and cutting plates with care - they are extremely
sharp.
●
Some foods may discolour the plastic. This is perfectly normal
and won’t harm the plastic or affect the flavour of your food. Rub
with a cloth dipped in vegetable oil to remove the discolouration.
power unit
●
Wipe with a damp cloth, then dry. Ensure that the interlock area
is clear of food debris.
●
Don’t immerse the power unit in water.
●
Wrap excess cord around the bracket at the back of the
appliance.
all other parts
●
Wash by hand, then dry.
●
Alternatively they can be washed on the top rack of your
dishwasher. A short low temperature programme is
recommended.
service & customer care
●
If the cord is damaged it must, for safety reasons, be replaced
b
y KENWOOD or an authorised KENWOOD repairer.
U
K
I
f you need help with:
●
using your appliance or
●
s
ervicing, spare parts or repairs (in or out of guarantee)
ట
call Kenwood customer care on 023 9239 2333. Have your
model number (ie FP120) and date code (4 digit code
i
e 6T41) ready. They are on the underside of the power unit.
●
s
pares and attachments
టcall 0870 2413653.
●
o
ther countries
C
ontact the shop where you purchased your appliance.
●
Designed and engineered by Kenwood in the UK.
●
M
ade in China.
IMPORTANT INFORMATION FOR CORRECT DISPOSAL
OF THE PRODUCT IN ACCORDANCE WITH EC
DIRECTIVE 2002/96/EC.
At the end of its working life, the product must not be disposed of as
urban waste.
It must be taken to a special local authority differentiated waste
collection centre or to a dealer providing this service.
Disposing of a household appliance separately avoids possible
negative consequences for the environment and health deriving
from inappropriate disposal and enables the constituent materials
to be recovered to obtain significant savings in energy and
resources. As a reminder of the need to dispose of household
appliances separately, the product is marked with a crossed-out
wheeled dustbin.
guarantee UK only
If your food processor goes wrong within one year from the date
you bought it, we will repair it (or replace it if necessary) free of
charge provided:
●
it has been used in accordance with these instructions.
●
you have not misused, neglected, or damaged it;
●
it has not been modified (unless by KENWOOD);
●
it is not second hand;
●
it has not been used commercially;
●
you have not fitted a plug incorrectly; and
●
you supply your receipt to show when you bought it.
This guarantee does not affect your statutory rights.
4