Kenwood FP630 Food Processor User Manual


 
citrus press (if supplied)
U
se the citrus press to squeeze the juice from citrus fruits (eg
oranges, lemons, limes and grapefruits).
cone
sieve
to use the citrus press
1
Fit the drive shaft and bowl onto the power unit.
2 Add the sieve and turn clockwise until the interlock fin on the
sieve aligns with the line on the power unit .
3
Place the cone over the drive shaft turning until it drops all the
way down .
4
Cut the fruit in half. Then switch on and press the fruit onto the
cone.
T
he citrus press will not operate if the sieve is not
locked correctly.
KENSTORE™ attachments carousel
Your food processor is supplied with an attachment storage
carousel that fits inside the bowl.
to use the storage carousel
1 Fit the knife blade to the bowl.
2 Then fit the whisk, discs and canopy into the carousel .
3 Fit the carousel over the knife blade and place the processor lid
on top
care & cleaning
Always switch off and unplug before cleaning.
Handle the blades and cutting discs with care - they are
extremely sharp.
Some foods may discolour the plastic. This is perfectly normal
and won’t harm the plastic or affect the flavour of your food. Rub
with a cloth dipped in vegetable oil to remove the discolouration.
power unit
Wipe with a damp cloth, then dry. Ensure that the interlock area
is clear of food debris.
Wrap excess cord around the bracket at the back of the
appliance.
liquidiser
1 Empty the jug before unscrewing it from the blade unit.
2 Wash the jug by hand.
3 Remove and wash the sealing ring.
4 Don’t touch the sharp blades - brush them clean using hot
soapy water, then rinse thoroughly under the tap. Don’t
immerse the blade unit in water.
5 Leave to dry upside down.
twin beater geared whisk
Detach the beaters from the drive head by gently pulling them
free. Wash in warm soapy water.
Wipe the drive head with a damp cloth, then dry. Do not
immerse the drive head in water.
all other parts
Wash by hand, then dry.
Alternatively they can be washed on the top rack of your
dishwasher. A short low temperature programme is
recommended.
service and customer care
I
f the cord is damaged it must, for safety reasons, be replaced
by Kenwood or an authorised Kenwood repairer.
If you experience any problems with the operation of
t
he processor, before calling for assistance refer to
t
he troubleshooting guide.
UK
If you need help with:
U
sing your machine
Servicing or repairs (in or out of guarantee)
call Kenwood customer care on 023 92392333. Have your
m
odel number ready - it’s on the underside of the processor.
s
pares and attachments
call 0844 557 3653.
other countries
Contact the shop where you brought the food processor.
Designed and engineered by Kenwood in the UK.
Made in China.
IMPORTANT INFORMATION FOR CORRECT DISPOSAL
OF THE PRODUCT IN ACCORDANCE WITH EC
DIRECTIVE 2002/96/EC.
At the end of its working life, the product must not be disposed of as
urban waste.
It must be taken to a special local authority differentiated waste
collection centre or to a dealer providing this service.
Disposing of a household appliance separately avoids possible
negative consequences for the environment and health deriving
from inappropriate disposal and enables the constituent materials
to be recovered to obtain significant savings in energy and
resources. As a reminder of the need to dispose of household
appliances separately, the product is marked with a crossed-out
wheeled dustbin.
guarantee UK only
If your food processor goes wrong within one year from the date
you bought it, we will repair it (or replace it if necessary) free of
charge provided:
you have not misused, neglected, or damaged it;
it has not been modified (unless by Kenwood);
it is not second hand;
it has not been used commercially;
you have not fitted a plug incorrectly; and
you supply your receipt to show when you bought it.
This guarantee does not affect your statutory rights.
5