Kenwood FP930 Mixer User Manual


 
9
Problem Cause Solution
The processor will not operate No power/indicator light not lit. Check processor is plugged in
Bowl not locked on correctly. Check bowl is located correctly and the handle is
situated towards the right hand side.
Lid not locked correctly. Check that the lid interlock is located correctly into
the handle area.
The processor will not work if the bowl and
lid are fitted incorrectly.
If none of the above check the fuse/circuit breaker in
your home.
Liquidiser/mill will not operate Wrong base used. The mill base is not interchangeable with the
FP920/FP930 liquidiser jug. The processor
will not operate if the wrong base is fitted.
Check graphic is correct on base used.
Processor stops during Processor overloaded/maximum capacities Check maximum capacities stated under “to use your
processing exceeded. food processor”.
Lid unlocked. Check lid is locked correctly.
Poor performance of Refer to hints in relevant “using the attachment” section. Check attachments are assembled correctly.
tools/attachments.
troubleshooting guide
IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF
THE PRODUCT IN ACCORDANCE WITH EC DIRECTIVE
2002/96/EC.
At the end of its working life, the product must not be disposed of as
urban waste.
It must be taken to a special local authority differentiated waste
collection centre or to a dealer providing this service.
Disposing of a household appliance separately avoids possible
negative consequences for the environment and health deriving from
inappropriate disposal and enables the constituent materials to be
recovered to obtain significant savings in energy and resources. As a
reminder of the need to dispose of household appliances separately,
the product is marked with a crossed-out wheeled dustbin.