Kenwood HB640 Blender User Manual


 
Head Office Address:
Kenwood Limited, New Lane, Havant, Hampshire PO9 2NH, UK
www.kenwoodworld.com
Designed and engineered by Kenwood in the UK
Made in China
2504/2
HB600 HB630 HB650 series
HB610 HB640 HB660 series
to use the whisk (if
supplied)
You can whip light ingredients
such as egg whites; cream;
instant desserts; and eggs and
sugar for whisked sponges.
Don’t whisk heavier mixtures such
as margarine and sugar - you’ll
damage the whisk.
1 Push the wire whisk into the whisk
collar
.
2 Fit the power handle inside the
whisk collar, turn and lock
.
3 Place your food in a bowl.
Don’t whisk more than 4 egg
whites or 400ml (
3
4pt) cream.
4 Plug in. To avoid splashing, start
on speed 1. Move the whisk
clockwise.
Don’t let liquid get above the
whisk wires.
5 After use, unplug and dismantle.
storage
1 Wrap the cord around the power
handle, then clip the end into the
cord clip
.
(HB650/HB660 series)
2 Fit the tool tidy onto the chopper
cover (line up the tab first)
.
3 Fit the power handle on top and
turn. On each side store the
attachments - simply lower, then
turn
.
cleaning
Always switch off and unplug
before cleaning.
Don’t touch the sharp blades.
Take special care when preparing
food for babies, the elderly and
infirm. Always ensure that the
hand blender shaft is thoroughly
sterilised. Use a sterilising solution
in accordance with the sterilising
solution manufacturers
instructions.
Some foods, eg carrot, may
discolour the plastic. Rubbing with
a cloth dipped in vegetable oil
helps remove discolouring.
power handle, chopper
cover, whisk collar
Wipe with a damp cloth, then dry.
Never immerse in water or use
abrasives.
blender shaft
either
Part-fill the beaker with warm,
soapy water. Then insert the
blender shaft and switch on.
Unplug, then dry.
or see below.
blender shaft, chopper
blade, whisk, beaker, bowl,
base/lids
Wash up, then dry. Or wash in
your dishwasher.
service and customer
care
If the cord is damaged it must, for
safety reasons, be replaced by
Kenwood or an authorised
Kenwood repairer.
UK
If you need help with:
using your hand blender or
servicing or repairs (in or out of
guarantee)
call Kenwood on 023 9239 2333
and ask for Customer Care. Have
your model number ready -
it’s on the power handle.
spares and attachments
call 0870 2413653.
other countries
Contact the shop where you
bought your hand blender.
Designed and engineered by
Kenwood in the UK.
Made in China.
IMPORTANT INFORMATION
FOR CORRECT DISPOSAL OF
THE PRODUCT IN
ACCORDANCE WITH EC
DIRECTIVE 2002/96/EC.
At the end of its working life, the
product must not be disposed of as
urban waste.
It must be taken to a special local
authority differentiated waste collection
centre or to a dealer providing this
service.
Disposing of a household appliance
separately avoids possible negative
consequences for the environment
and health deriving from
inappropriate disposal and enables
the constituent materials to be
recovered to obtain significant
savings in energy and resources. As
a reminder of the need to dispose of
household appliances separately, the
product is marked with a crossed-out
wheeled dustbin.
guarantee - UK only
If your hand blender goes wrong
within one year from the date you
bought it, we will repair it (or
replace it if necessary) free of
charge provided:
you have not misused, neglected
or damaged it;
it has not been modified (unless by
Kenwood);
it is not second-hand;
it has not been used commercially;
you have not fitted a plug
incorrectly; and
you supply your receipt to
show when you bought it.
This guarantee does not affect your
statutory rights.