Kenwood IH100 Range User Manual


 
before using your Kenwood
appliance
Read these instructions carefully and
retain for future reference.
Remove all packaging and any
labels.
important note - medical
implants
The induction hob generates short-
range magnetic fields. If any user or
person in close proximity has a
pacemaker or other active implants,
please consult a doctor before use
concerning any possible
incompatibility to prevent any risk to
health.
safety
Do not immerse the appliance,
supply cord or plug in water or other
liquid.
Never use a damaged appliance,
cord or plug. Get it checked or
repaired: see ‘service’.
Do not leave the appliance
unattended when in use.
Do not let the cord hang over the
edge of the table or worksurface or
touch hot surfaces.
Always unplug the appliance when
not in use or before cleaning.
Make sure that electrical cords
connecting other appliances in the
proximity cannot come into contact
with the induction hob.
During and after use of the induction
hob, certain parts will become very
hot. The hob plate will remain hot
from residual heat. Do not touch hot
parts.
The pan and contents will remain hot
after use.
After removing the pan from the
induction hob, place on a heat
resistant surface.
Do not scratch the hob plate with
sharp objects.
Don’t use the hob plate as a
worksurface.
Never use the hob plate for storage.
Do not use the induction hob if the
hob plate is broken or cracked in
any way.
Do not put hot or sharp implements
or pans onto the control panel.
Never put paper, aluminium foil,
cloth, plastic materials or other
unrelated objects on the hob plate
when the induction hob is in use or
is hot. Foil used to cover items
during cooking should not be
allowed to come in direct contact
with the hob plate.
For safety, never leave the handle of
your pan sticking out over the
worksurface.
Make sure the underside of the
cooking pan and the hob plate are
clear from water, grease or other dirt
before cooking.
Do not use pans with rough bases
as these may scratch the hob plate.
Do not allow the air entry or air vents
to be covered or blocked in any way.
Always ensure that there is adequate
ventilation around the induction hob
during operation.
The induction hob should not be
used near or below curtains and
other combustible materials.
Never unplug the induction hob
during operation before switching it
off first. If the on/off button is lit for a
long time (i.e. if the appliance is in
operation or a protective condition),
first press the on/off button to turn
off the appliance and remove the
plug after the fan has stopped.
Never use the appliance on a gas
stove or on stainless steel or iron
worktops/surfaces.
Do not place this appliance on or
near a naked flame, hot plate or in a
heated oven.
2