Filter
Top Products
Mill AT286 (if supplied)
Use the mill for milling herbs, nuts and coffee beans.
safety
●
Don’t touch the sharp blades. Keep the blade unit away from children.
●
O
nly use the jar and the blade unit with the base supplied.
●
N
ever blend hot liquids in the mill.
●
Never remove the mill until the blades have completely stopped.
●
Never attempt to fit the blade unit to the machine without the jar fitted.
●
W
hen removing the mill from the power unit, care should be taken not to
unscrew the milling jar from the base assembly.
●
To ensure the long life of your mill, never run for longer than 30 seconds.
S
witch off as soon as you have got the right consistency.
●
The processing of spices is not recommended as they may damage the
plastic parts.
●
T
he appliance will not work if the mill is incorrectly fitted.
●
U
se for dry ingredients only.
key ቱ
ቢ
base
ባ
blade unit
ቤ sealing ring
ብ
milling jar
to use the mill
1 Put your ingredients into the jar.
2
Ensure the sealing ring is correctly fitted on the blade unit.
3 Turn the blade unit upside down. Lower it into the jar, blades down.
4 Screw the base onto the jar until it’s finger-tight.
5 Remove the high speed outlet cover by turning anti clockwise and lifting
off ᕡ.
6 Place the mill onto the outlet with the arrow on the mill base towards the
back of the machine. Turn the mill clockwise to lock firmly into place until the
two arrows align .
7 Switch on to maximum speed.
●
The attachment will not operate if it is incorrectly assembled
or incorrectly fitted to the kitchen machine or if the medium
speed outlet cover is not fitted.
8 Once the desired consistency has been achieved switch off and unplug.
9 Remove the mill.
10Refit the high speed outlet cover after use.
hints
●
Herbs are best milled when clean and dry.
●
When milling coffee beans, the longer the running time the finer the result.
●
The maximum capacity for herbs is 10g and nuts and coffee beans 50g.
care and cleaning
●
Always switch off and unplug before removing the attachment from the
kitchen machine.
●
Dismantle the attachment fully before cleaning.
●
For easier cleaning always wash the parts immediately after use.
jar, base
Wash by hand in hot soapy water.
The jar and base may also be washed in the dishwasher.
blade unit
1 Remove and wash the sealing ring.
2 Brush the blades clean under a tap. Keep the underneath of the unit dry.
3 Leave to air dry.
Food Processor AT284 (if supplied)
Use the food processing attachment to chop, slice, shred and rasp. The citrus
j
uicer attachment (if supplied) can be used to juice citrus fruit and can only be
u
sed with the AT284 food processor.
i
mportant
When removing the packaging, ensure the plastic blade cover is removed
f
rom the knife blade. Take care the blades are very sharp. The cover
s
hould be discarded as it is to protect the blade during manufacture and
transit only.
safety
●
The blades and discs are very sharp, handle with care. Always hold the
k
nife blade by the finger grip at the top, away from the cutting
edge, both when handling and cleaning.
●
Always remove the knife blade before pouring contents from the bowl.
●
K
eep hands and utensils out of the processor bowl whilst connected to the
p
ower supply.
●
Never use your fingers to push food down the feed tube. Always use the
p
usher/s supplied.
●
B
efore removing the lid from the bowl or the attachment from the power
unit:-
●
●
s
witch off;
●●
w
ait until the blades/discs have completely stopped;
●
When slicing/shredding or rasping don’t let the bowl fill up as far as the
c
utting disc: empty it regularly.
●
S
hould excessive vibration occur when using this attachment, either reduce
t
he speed or stop the machine and remove some of the contents.
●
This machine will be damaged and may cause injury if the
interlock mechanism is subjected to excessive force.
key ቲ & ታ
food processor
ቢ pushers: large and small
ባ feed tube
ቤ food processor lid
ብ finger grip
ቦ knife blade
ቧ food processor bowl
ቨ drive shaft
ቩ thick slicer/shredder disc
ቪ thin slicer/shredder disc
ቫ rasping disc
optional discs
ቭ thin (julienne style) chipper disc
ቮ standard chipper disc
ቯ extra coarse shredding disc
citrus juicer
ተ cone
ቱ sieve
Not all of the above parts will necessarily be included in pack. Contents are
dependent upon model variant.
knife blade
Use the knife blade to chop raw and cooked meat, cooked eggs,
vegetables, nuts, pâtés and dips and to also make crumbs from bread and
biscuits.
to use the knife blade
1 Remove the medium speed outlet cover by lifting off
ᕡ
.
2
Place the drive shaft onto the outlet
ᕢ
.
3 Fit the bowl over the drive shaft with the handle above the on/off and speed
switch and turn clockwise until it locks into position
ᕣ
.
4 Fit the knife blade over the drive shaft and turn until it drops all the way down.
The knife blade is very sharp always handle with care.
5 Cut the food up and place into the bowl ensuring that it is evenly distributed.
6 Fit the lid, feed tube above the speed switch and turn clockwise ensuring
that the tab on the lid slots into the groove in the bowl handle
ᕤ
. When
correctly fitted the markings should align .
●
The attachment will not operate if it is incorrectly assembled
or incorrectly fitted to the kitchen machine or if the high
speed outlet cover is not fitted.
7 Fit the pushers.
6