Filter
Top Products
3 Whilst the sandwich maker is heating
up prepare the bread and filling.
Always select bread of a suitable
size to fit the plates.
●
For golden toasted sandwiches,
spread butter on the outside of the
bread. Do not use low fat spreads,
which are not suitable for toasting.
●
Place the filling between the
unbuttered side of the bread.
●
Ensure the sandwiches are evenly
filled to assist with even browning.
4 Unlatch the handle ባ and open the
lid.
5 Place the sandwiches on the plate
and close and latch the lid. Do not
force the lid closed.
●
If the lid is difficult to close you may
have added too much filling or the
bread is too thick.
6 Allow the sandwiches to toast for
3 – 8 minutes depending on taste
and to ensure raw ingredients
(e.g bacon) are thoroughly cooked.
Alternatively, pre-cook before
toasting.
●
Beware of steam which may escape
from the front of the appliance
during cooking.
7 The temperature light will come on
and off as the sandwich maker
maintains the correct temperature.
8 When the sandwiches are cooked,
carefully remove them using a
wooden or plastic spatula.
9 Do not use metal utensils as they will
scratch and damage the non-stick
surface.
10Switch off and unplug after use.
Allow the sandwich maker to cool
completely before cleaning.
to make pastry snacks
Ready made pastry sheets such as
filo or puff pastry are ideal for making
quick and easy snacks.
1 Place a suitable sized piece of pastry
sheet on the pre-heated toasting
plate.
2 Form hollows in the pastry and
spoon on the filling such as apple,
ricotta cheese or vegetables.
3 Top with another piece of pastry and
close the lid.
4 Cook until the pastry is golden
brown.
cleaning
●
Switch off, unplug and allow the
sandwich maker to cool down
completely.
●
Clean the sandwich toaster after
each use to maintain it in a good
clean working condition.
the outside
Wipe with a damp cloth then dry.
toasting plates
●
Remove the plates by pressing the
plate release buttons ᕡ.
●
Wash the plates in hot soapy water.
Do not wash in your
dishwasher.
●
Do not use abrasive cleaners as they
will damage the non-stick coating.
●
Ensure the plates are completely dry
before refitting to the sandwich
maker.
●
Refit the grill plates by lining up the
back of the plates with the unit first,
then press down to lock in place.
service and customer
care
●
If the cord is damaged it must, for
safety reasons, be replaced by
KENWOOD or an authorised
KENWOOD repairer.
If you need help with:
●
using your sandwich maker
●
servicing or repairs
●
Contact the shop where you bought
your sandwich maker.
3