Keurig B70 Coffeemaker User Manual


 
10
c. After setting the desired AUTO-OFF time,
press the MENU Button five times to
scroll through the remaining program-
ming options and exit the programming
mode. ‘AUTO OFF SET’ will now be dis-
played to indicate that it has been set.
d.To cancel the AUTO-OFF feature, press
the MENU Button twice to reach the
AUTO-OFF programming mode. Press
and release the Button under the flash
ing H to advance one hour at a time until
‘OFF’ is displayed. Press menu 5 times
to exit programming.
3. Program Your Brewer to Turn ON and/or
OFF at a Specific Time.
EXAMPLE:
If you chose to set the On Time
at 6:15 AM and the Off Time for 10:00 PM,
then the Brewer will be ‘ON’ and maintain
hot water in the tank during that time so
that it is always ready for you to brew. If
you wanted to brew outside this window,
simply press and release the Power Button
and you can brew as soon as the water is
heated and the ‘READY TO BREW’ indica-
tor is displayed on the LCD Control Center.
a. After setting the correct time (required),
press the Menu Button three times to
program the Auto On time feature. The
LCD Control Center will show the pro-
gramming options with a small arrow
next to ‘SET ON TIME’.
b.Press or hold the ‘LEFT’ Button under
the H to scroll through the hours to your
desired ON time hour.
c. Press or hold the ‘RIGHT’ Button under
the M to scroll through the minutes to
your desired ON time minutes.
d. After setting the desired time, press the
Menu Button to save the On Time and
move to the ‘SET OFF TIME’.
e. If you want to set an OFF time, repeat
the procedure above in steps b & c to
set your desired OFF time.
f. To complete the process, press the
Menu Button three more times to exit
the programming mode. The Control
Center will now indicate the options you
have set.
NOTE:
The AUTO ON time and AUTO
OFF time functions operate independently
from one another. To cancel either
function, follow the steps above and use
the H and M Buttons to advance to
12:00 AM. When you reach 12:00 AM,
the Control Center will display ‘OFF’
and the function will be disabled.
NNOTE:
To use this programming feature,
the clock must be set to the correct time.
The clock will not be displayed unless the
time is set.
b07461_Keurig_CareGuide_spreadsB70 18/5/07 12:04 Page 10