Filter
Top Products
SECTION 2
Controls & Indicators (LED Control Center)
Programming Auto Off Timer Feature
Set the brewer to turn off two hours after the last brew.
1. Press the Power Button to turn on the brewer.
2. Press the black Auto Off Button to turn on the
Auto Off Timer feature (fig. 7). The green Auto
Off Light will illuminate.
When the Auto Off Timer is enabled, your
brewer will automatically turn off two hours
after your last brew.
3. To disable the Auto Off Timer, simply press the
black Auto Off Button again and the green Auto
Off Light will turn off.
Cleaning External Parts
Regular cleaning of the brewer’s external components is recommended.
1. Never immerse the brewer in water or other liquids. The Housing and other
external components may be cleaned with a soapy, damp, non-abrasive cloth.
2. The Drip Tray can accumulate up to 8 oz. of overflow. The Drip Tray and
Drip Tray Plate should be periodically inspected and rinsed clean. To
remove the Drip Tray Assembly, simply slide it toward you, keeping it level
at all times to avoid spilling. The Drip Tray and Drip Tray Plate should not
be placed in the dishwasher. They should be cleaned with a damp, soapy,
non-abrasive cloth and rinsed thoroughly.
Cleaning the K-Cup
®
Pack Holder Assembly
1. Cleaning the Parts —The K-Cup
®
Pack Holder
Assembly can be placed onto the top shelf of a
dishwasher. NOTE: Use low temperature cycles in
the dishwasher.
To remove from the brewer, lift the
Handle and grasp the top of the K-Cup
®
Pack
Holder with one hand while pushing up on the
bottom of the K-Cup
®
Pack Holder from
underneath with the other until it releases
(fig. 8). After cleaning, align the K-Cup
®
Pack
Holder with the opening using the two front ribs
as a guide and snap into place from the top.
SECTION 3
Cleaning & Maintenance
fig.
8
fig.
7
10