Filter
Top Products
15
Classic Series Custom Panels
For Classic Series models: KSSS36FMX, KSSS42FMX,
KSSS48FMX, KSSS36QMB, KSSS42QMB, KSSS48QMB,
KSSS36QMW, KSSS42QMW, KSSS48QMW, KSSS36QMX,
KSSS42QMX, and KSSS48QMX.
If you plan to install custom wood panels, you will need to create
the panels yourself or consult a qualified cabinetmaker or
carpenter. See dimension drawings for panel specifications.
IMPORTANT: Panels weighing more than recommended may
cause damage to your refrigerator.
NOTE: Dimensions shown have a (±)¹⁄₁₆" (1.5 mm) tolerance.
Panels that are more than ¹⁄₄" (6.35 mm) thick must be routed. If
panels are less than ¹⁄₄" (6.35 mm) thick, install a filler panel
between the doors and decorative panels.
Top Grille Panel
The top panel should not weigh more than 10 lbs (4.5 kg).
Door Panels for Non-dispenser Models
The freezer panel should not weigh more than 30 lbs (13.5 kg).
The refrigerator panel should not weigh more than 50 lbs (23 kg).
Door Panels for Dispenser Models
The two freezer panels combined should not weigh more than
30 lbs (13.5 kg). The refrigerator panel should not weigh more
than 50 lbs (23 kg).
Top Grille Panel – Routing Requirements
If the custom panels are thicker than ¹⁄₄" (6.35 mm), the top and
bottom edges of the top panel should be edge routed ¹⁄₂" (1.3 cm)
and ³⁄₈" (9.5 mm), respectively. Both ends should be edge routed
⁷⁄₈" (2.2 cm) as shown.
Model A
36
42
48
35³⁄₈" (89.5 cm)
41³⁄₈" (105 cm)
47³⁄₈" (120 cm)
Model A B
36
42
48
14¹⁄₄" (36.2 cm)
16³⁄₄" (42.6 cm)
19¹⁄₄" (48.9 cm)
19¹⁄₄" (48.9 cm)
22³⁄₄" (57.8 cm)
26¹⁄₄" (66.7 cm)
A
7¹⁄₄"
(184 mm)
70⁷⁄₁₆"
(179 cm)
A B
Model A B
36
42
48
14¹⁄₄" (36.2 cm)
16³⁄₄" (42.6 cm)
19¹⁄₄" (48.9 cm)
19¹⁄₄" (48.9 cm)
22³⁄₄" (57.8 cm)
26¹⁄₄" (66.7 cm)
70⁷⁄₁₆"
(179 cm)
23⁷⁄₁₆"
(59.5 cm)
34⁷⁄₁₆"
(87.4 cm)
A B
¹⁄₄"
(6.35 mm)
max.
⁷⁄₈"
(2.2 cm)
Top
Grille
¹⁄₄
"
(6.35 mm)
max.
⁷⁄₈"
(2.2 cm)
Top
Grille