Filter
Top Products
Mini Bowl and
Mini Blade Assembly
1. Place the mini bowl inside the
work bowl over the power shaft.
Rotate the mini bowl until it falls
into place.
2. Fit the mini blade on the power
shaft. It may be necessary to
rotate the blade until it falls into
place.
3. To remove the mini bowl after
processing, lift the bowl using the
two finger grips located along the
top edge of the bowl.
Citrus Press Assembly and Use
1. Position and lock the work bowl
on the base.
2. Place the strainer basket in the
bowl and position the locking clip
to the left of the work bowl
handle.
3. Turn the basket counterclockwise
until the clip locks into the handle.
4. The 2-piece cone offers two sizes.
Use the outer cone for grapefruit,
oranges and other large fruits.
Remove the outer cone to reveal a
smaller, inner cone that’s perfect
for lemons and limes.
10
Preparing the Food Processor for Use
WARNING
Cut Hazard
Handle blades carefully.
Failure to do so can result in
cuts.