KitchenAid 4KUIS185S Ice Maker User Manual


 
CUBELET CUTTER GRIDS
19mmx19mm
b
CUBE CUTTER GRID
l-114” x l-114” Cube Grid
(32 mm x 32 mm)
CHECK OPERATION
Start the unit by turning the service switch to
“ON” and opening the line water valve.
NOTE: Left is “OFF”-Middle is “ON”--Right is
“CLEAN.” In “CLEAN” position, only the pump
operates.
Check condenser fan to make sure it is revolving.
Water will not enter pump pan until freezing plate
gets cold and machine goes into a harvest cycle.
Check for even water flow over freezing plate. Unit
must be level for proper operation.
Check for desired cube thickness and after 24
hours adjust if necessary. Maximum ice yield
will be obtained with ice thickness at l/2” (12 mm)
to 518” (16 mm).
Replace grill.
‘KitchenAid is a registered trademark of KitchenAid, Inc. U.S.A.
KitchenAid Canada, Inc. Licensee
Part No. 759080-T
KitchenAid Canada, Inc.
Mississauga, Ont. L5N 3A7
Printed in U.S.A.