Filter
Top Products
21
English
USING YOUR ACCESSORIES
USING YOUR ACCESSORIES
4
To remove slicing disc, remove lid and
using the 2 finger grips, lift the disc
straight up.
Finger gripFinger grip
Installing/removing the slicing disc
1
Place the disc on the power shaft.
2
Slightly rotate the disc until it drops
into place.
3
Install the lid, aligning the tabs and
locking it into place.
NOTE: This lever only works with the
adjustable slicing disc. Changing thickness
settings with other discs or blades installed
will have no effect on operation.
In addition to the position of the lever, it
is possible to change the thickness of your
slices by changing pressure on the food
item when guiding it into the feed tube.
Use more pressure for a thicker slice, or
use less pressure for a thinner slice.
Adjusting the slicing thickness
Move lever to select desired thickness.
Thicker
Thinner
IMPORTANT: Discs and adapters must be removed before removing bowls.
W10529664A_01_EN.indd 21 12/12/12 4:58 PM