Filter
Top Products
10
OPERATING THE HAND BLENDEROPERATING THE HAND BLENDER
Before First Use
Before using the Hand Blender for the
first time, wipe the motor body, the
blending arm with blade and the guards
with a clean, damp cloth to remove any
dirt or dust. Mild dish soap may be used.
Do not use abrasive cleansers. Dry
thoroughly with a soft cloth. See “Care
and Cleaning” section for more information.
Assembling the Hand Blender
4
Snap pan guard into place with an even,
downward motion.
3
If using a pan guard, place it on a flat
surface and position with mounting clips
between the ports of the blade.
1
Insert blending arm into motor body
and twist until it clicks to lock in place.
Port
Mounting
grips
NOTE: Use the bell
guard to avoid damage to
blade when Hand Blender
is not in use.
Use the pan guard to
avoid damage to cookware
while using Hand Blender.
Bell guard
Pan guard
2
Remove the bell guard from the blade.
5
Slide the charged battery into the top
of the Hand Blender motor body. Make
sure it latches securely.
W10532509A_01_EN_Final4.indd 10 12/11/12 1:34 PM