KitchenAid 87 Coffee Grinder User Manual


 
Faceplate Assembly & Screws
Assembly includes the grind control dial and grind level ring. Two
faceplate screws attach the faceplate assembly to the motor housing.
Loosen the screws and remove the faceplate assembly to access the
burrs. When reassembling the faceplate, the two screws must be
tightened simultaneously to allow the faceplate to sit flush with the
Burr Coffee Mill.
Precision Stainless Steel Cutting Burrs
Large 2
1
4-inch (5.7 cm) diameter flat cutting burrs provide long life
and superb grind consistency. Burrs can be adjusted to compensate
for wear, or calibrated to meet stringent Specialty Coffee Association
of America guidelines for espresso and French Press grinds.
Low-RPM Operation
A special DC motor and gear reduction system slows the rotation
of the cutting burrs, minimizing the frictional heating of the grinds
and preserving coffee flavor and aroma. The low rpm operation also
reduces the static charge – and “cling” – of coffee grinds.
Power Cord with Tie
Round cord has no grind-trapping seams; the tie can be used to
bundle any excess.
One-Piece Metal Base with No-Slip Rubber Feet
Metal base provides a stable platform for the mill. Rubber feet
dampen noise and vibration, and help protect the countertop.
Burr Cleaning Brush
Dense bristles sweep grinds from the cutting burrs quickly and easily.
6
ENGLISH
BURR COFFEE MILL FEatUREs