8
Install Oven
1. Using 2 or more people, lift oven partially into cabinet cutout
using the oven opening as an area to grip.
NOTE: Push against seal area of oven front frame when
pushing oven into cabinet. Do not push against outside
edges.
2. Push against seal area of front frame to push oven into
cabinet.
3. Push oven completely into cabinet and center oven into
cabinet cutout.
4. Securely fasten oven to cabinet using the #8-14 x 1" screws
(2 for single oven, 4 for double oven) provided. Insert the
screws through holes in mounting rails. Do not overtighten
screws.
5. On some models, the oven vent is taped to the side of the
oven.
With one #8-14 x ³⁄₈" screw for each side of the vent, fasten
vent securely to the oven.
6. Replace oven racks.
7. Replace oven door(s) by inserting ends of hinges into hinge
slots in the oven frame.
8. Push hinges in as far as they will go and open the oven door.
You should feel the oven door drop into place.
9. Rotate both hinge latches back to the locked position.
10. Check that the door is free to open and close. If it is not,
repeat the removal and installation procedures. See “Remove
Oven Door” section.
11. Reconnect power.
12. Display panel will light briefly, and “PF” should appear in the
display.
13. If display panel does not light, please reference the
“Assistance or Service” section of the Use and Care Guide or
contact the dealer from whom you purchased your oven.
WARNING
Excessive Weight Hazard
Use two or more people to move and install oven.
Failure to do so can result in back or other injury.
A. Mounting rail
B. Insert #8-14 x 1"
screw.
A. #8-14 x
³⁄₈" screw
B. Oven vent
A
B
A
B