Filter
Top Products
13
ķ℀ĸ
MODEL KFP350 ONLY
–To use Mini Bowl, position Mini
Bowl on power base shaft. Fit center
opening of mini blade over top of
attachment stem. Use caution; blades
are sharp. Turn stem counter-
clockwise to lock into place. Place
assembled mini blade on the power
base shaft. It may be necessary to
rotate bowl and blade slightly so that
it is properly aligned and falls into
place.
6. Place the work bowl cover on the
work bowl with the feed tube just to
the left of the work bowl handle.
Grasp the feed tube and turn the
cover to the right until it locks into
place.
NOTE: Your KitchenAid Food
Processor features a double interlock
safety system to insure that the unit
will not operate unless the work bowl
and the work bowl cover are properly
aligned with the power base.
NOTE: Never attach the cover to the
work bowl before the work bowl has
been positioned on the power base.
Damage to the work bowl may result.
7. Fit the pusher into the feed tube and
plug the unit into an electrical outlet.
NOTE: Never try to remove the work
bowl before unlocking the work
bowl cover (turning the work bowl
cover to the left). Damage to the
work bowl may result.
Assembling Your Food Processor
Pulse
On
Off
CAUTION:
READ INSTRUCTIONS BEFORE USING