Filter
Top Products
9
Clock
This is a 12-hour clock. Before setting, make sure the oven,
Timer, and Timed Cooking are off.
To Set:
1. Touch CLOCK SET.
2. Touch the number keypads to set the time of day.
3. Touch CLOCK SET or START.
Ton es
Tones are audible signals, indicating the following:
One beep
■ Valid keypad touch
■ Function has been entered
One chime
■ Oven is preheated
■ Preheat cycle has been completed
Three beeps
■ Invalid keypad touch
Three chimes
■ End of a cooking cycle
Four chimes
■ When timer reaches zero
Includes using the Kitchen Timer for functions other than
cooking.
Tone Volume
The volume is preset at low, but can be changed to high.
To Change: touch TOOLS and then “3” to toggle volume
between high and low settings.
All Tones
All tones are preset on, but can be turned off.
To Turn Off/On: touch TOOLS and then “2” to toggle tones
between On and Off settings.
End-of-Cycle and Reminder Tones
The Timed Cooking end-of-cycle and reminder tones are preset
on, but can be turned off. If all tones have been turned off, the
end-of-cycle and reminder tones cannot be independently turned
on.
To Turn Tones Off/On: touch TOOLS and then “4” to toggle
tones between On and Off settings.
NOTE: The Kitchen Timer is not affected by these reminder
tones.
Tools
(Microwave Oven Models)
The Tools selection keypad allows access to 7 hidden functions
within the Electronic Oven Control. These hidden functions allow
you to change the oven temperature between Fahrenheit and
Celsius, turn the audible signals on and off, prompts, turn the
turntable on and off, select the language, and select demo
modes.
NOTE: This procedure is for dedicated microwave ovens only.
Tools for combination ovens will appear on the oven display.
To Use:
1. Touch TOOLS. The oven display will scroll through the
various options, starting at 1 and ending automatically at 7.
You can also touch the Tools keypad repeatedly to manually
scroll through the list of options.
2. Touch the number keypad for the specific option to toggle the
function setup. Use the following chart as a guide.
TOOLS CHART
Fahrenheit and Celsius
The temperature is preset in Fahrenheit; however it can be
changed to Celsius.
To Change: Touch OPTIONS and then “1” to toggle temperature
between Fahrenheit and Celsius settings.
When the temperature is in Fahrenheit, “°F” follows the oven
temperature.
When the temperature is in Celsius, “°C” follows the oven
temperature.
Timer
The Timer can be set in minutes and seconds or hours and
minutes and counts down the set time.
NOTE: The Timer does not start or stop the oven.
To Set:
1. Touch SET/START.
Touch again to switch between MIN/SEC and HR/MIN.
If no action is taken, the control will continue to wait for a
length of time to be entered.
2. Touch the number keypads to set the length of time.
3. Touch SET/START.
If the keypad is not touched, the control will continue to wait
for SET/START to be touched.
When the set time ends, 4 chimes will continuously repeat
until the Timer Off keypad is touched.
If the Cancel keypad is touched, the oven will turn off;
however, the Timer can only be turned off using the Timer Off
keypad.
TOOLS HIDDEN FUNCTION
1 Fahrenheit and Celsius conversion
2 Sound On/Off
3 Sound High/Low
4 End tone On/Off
5 Turntable On/Off
6 Language
7Demo mode