KitchenAid KCM222CU Coffeemaker User Manual


 
14
3. For glass carafe models, press the
MODE button 6 times to enter the Clean
mode.
NOTE: For thermal carafe models, press
the MODE button 5 times to enter the
Clean mode.
The “Clean” indicator will flash until this
programming cycle is complete.
4. Press the PROGRAM/SET button. The
“Clean” and “ON” or “OFF” indicators
will flash. Press the “+” (plus) or “-”
(minus) button to select “ON.”
5. Press and hold the PROGRAM/SET
button to program the Clean setting. A
short beep will sound, indicating
programming is complete.
NOTE: If you do not hold the
PROGRAM/SET button until a short
beep is heard, the settings will be
maintained and the coffee maker will
exit to the default mode.
6. Press the BREW button to start the
cleaning cycle. Once the cleaning cycle
is complete, the “Clean” indicator will
turn off.
7. Rinse the coffee maker by running it
through 2 brewing cycles using a full
water tank of fresh, cool water each
time.
8. Wash the brew basket in hot, soapy
water and rinse with hot water. The brew
basket can also be washed in the upper
rack of the dishwasher.
9. Reinstall or replace the water filter.
Replace the filter every 3 months under
normal use. Replace it more often under
heavy use or hard water conditions.
TROUBLESHOOTING
If the brew timer display is not
illuminated:
Check to see whether the coffee maker
is plugged into a grounded 3-prong
outlet. If it is, check the fuse or circuit
breaker on the electrical circuit the
coffee maker is connected to and make
sure the circuit is closed.
If only a portion of the water added to
the coffee maker actually brews:
The coffee maker requires immediate
descaling. Please refer to “Descaling the
Coffee Maker” in the “Coffee Maker
Care” section.
If “Err4” appears on the brew button
timer display:
A button may be jammed. Unplug the
coffee maker and press each button
several times.
Plug the coffee maker into a grounded
3-prong outlet.
If “Err4” appears again on the display,
repeat this procedure.
Electrical Shock Hazard
Plug into a grounded 3 prong
outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions
can result in death, fire, or
electrical shock.
WARNING