KitchenAid KD-100 Garbage Disposal User Manual


  Open as PDF
of 4
 
DISPOSER INSTALLATION
/
1. Be sure the isolating splash guard (8) is in place. Lift disposer and engage hooh
(7) onto support plate (4), then engage hook (11) onto support plate (4). Turn
disposer to align with drain trap. Snap lever (10) downward to lock.
2. Connect the drain trap to the spout (9). If necessary. pry lever (10) outward
and turn disposer for better alignment.
3. Connect the dishwasher drain hose to the disposer inlet (13) with a hose clamp
(where applicable).
4. Check to assure that the grinding chamber is clean of any foreign objects and tire
flywheel is free to rotate, Place the cover in position and fill the sink at least
three inches deep. Remove the cover and, as the water drains. chech all con
nections for leaks
TYPICAL INSTALLATIONS Height
of drain must not exceed height of
disposer discharge opening.
Typical “P” Trap Connection
Connection With Straight-Away Drain Spout
 previous