KitchenAid KDDC24 Refrigerator User Manual


 
Double Refrigerator Drawers, Refrigerator/Freezer Drawers
and Double Freezer Drawers
PRODUCT MODEL NUMBERS
KDDC24 KDDO24
115-Volt, 60-Hz, AC-only 15- or 20-amp fused, grounded electrical supply is required. It is
recommended that a separate circuit serving only your refrigerator drawers be provided. Use an
outlet that cannot be turned off by a switch. Do not use an extension cord.
Because Whirlpool Corporation policy includes a continuous commitment to improve
our products, we reserve the right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.
Ref. W10310148A
3/18/10
Page 2 of 2
ELECTRICAL REQUIREMENTS
OPENING DIMENSIONS (Both Styles)
Height dimensions are shown with the leveling
legs extended to the minimum height of 1/4"
(6.35 mm) below the refrigerator drawers.
NOTE: When leveling legs are fully extended to
1" (25 mm) below the refrigerator drawers, add
3/4" (19.05 mm) to the height dimensions.
See “Product Dimensions.”
Critical Dimensions:
A.14
³⁄₄
" (37.5 cm) utility opening
B.24" (60.96 cm) minimum opening width
¹⁄₂"
(1.3 cm)
A
14³⁄₄"
(37.5 cm)
24"
(60.96 cm)
min.
24" (60.96 cm) min.
34³⁄₈" (87.3 cm) min.
35" (88.9 cm) max.
B
TOP AND BOTTOM OVERLAY DRAWER PANEL DIMENSIONS
The thickness of the overlay panels must be ³⁄₄"
(19.05 mm).
Each overlay panel must not weigh more than
10 lbs (4.5 kg).
Do not exceed the height dimension for the overlay
panels.
The width of the overlay panels may vary according
to the width of the cabinet opening.
A.Overlay hook locations
B.Route
¹⁄₈
" deep
Reverse Side
23⁵⁄₈"
(60.0 cm)
14⁷⁄₈"
(37.8 cm)
¹⁵⁄₁₆" (2.4 cm)
4¹⁄₈"
(10.5 cm)
¹³⁄₁₆"
(2.1 cm)
2³⁄₁₆"
(5.6 cm)
¹³⁄₁₆"
(2.1 cm)
A
¹⁵⁄₁₆"
(2.4 cm)
1³⁄₄"
(4.4 cm)
R
¹⁄₁₆"
(1.6 mm)
min.
B
Pilot Holes
¹⁄₁₆" (1.6 mm) diameter x
³⁄₈" (9.5 mm) deep
8 places