Filter
Top Products
ELECTRICAL REQUIREMENTS
Electrical Shock Hazard
- Electrical ground is required on this appliance.
l
Improper connection of the equipment-grounding conductor line can result in
electrical shock.
. Check with a qualified electrician if you are in doubt as to whether the appliance is
properly grounded. Do Not modify the power supply cord plug. If it will not fit the
outlet, have a proper outlet installed by a qualified electrician.
- Do Not use an extension cord with this appliance. Such use may result in a fire,
electrical shock or other personal injury.
. Do Not have a fuse in the neutral or ground circuit. A fuse in the neutral or ground
circuit could result in an electrical shock.
l
This appliance must be connected to a grounded, metallic permanent wiring system;
or a grounding conductor should be connected to the grounding terminal or lead on
the appliance. Failure to do so could result in an electrical shock.
I
I
It is the customer’s responsibility tocontact a qualified electrical installer to assure that electrical installation is
adequate and in conformance with National Electrical Code, ANSliNFPA 70.latest edition and local codes and
ordinances.
A 1201240.volt or 1201208 volt, 60 Hz, AC only, fused electrical supply is required. A time-delay fuse or circuit breaker
is recommended. It is recommended that a separate circuit serving only this appliance be provided. It is the personal
responsibility of the customer to have a properly grounded, 3-prong wall receptacle installed by a qualified
electrician.
The following amperage circuits must be provided.
When installed in a mobile home, the installation must conform to the Manufactured Home Construction and Safety
Standards, Title 24 CFR, Part 3280 (formerly the Federal Standard for Mobile Home Construction and Safety, Title
24. HUD, Part 280)
Model No
KEBS177
KEBI140/141/170/171
TABLE 1
[ -%axlmum Wattage (KW)
Fuse or Breaker
240/208 Volt
3.713 0
Size Required
KEBS145/146/176
SCO-1243/1273
SCO-243312733
KEBl240/270
SCO-224312273
I
I
c
3
813 0
I
30 Amps
6 O/5 0
KEBS277
KEBl241/271
KEBS24512461276
X0-2443/2743
7 315 8
40 Amps
/
7 516 0
_~--~~.~~