KitchenAid KECC502G Cooktop User Manual


 
Using the surface units
Control knobs (Models KECC501G,
KECC502G, YKECC502G, KECC507G
YKECC507G, KECC562G, KECC567G,
YKECC567G)
Push in control knobs before turning them to
a setting. Set them anywhere between HI and
OFF.
Electronic touch controls (Models
KECC508G, YKECC508G, KECC568G,
YKECC568G)
Touch ON/OFF to turn heating elements on.
The LO and HI lights will blink on and off,
indicating a choice of high or low power. To
choose high power, touch the arrow pointing to
HI. To choose low power, touch the arrow
pointing to LO.
7
Using Your Cooktop
This section tells you how to operate the controls on the cooktop. It also discusses how the
ceramic glass cooktop works, and includes tips on how to cook with and maintain the cooktop.
Surface unit
marker
H
I
L
O
O
F
F
M
E
D
M
E
D
H
I
M
E
D
L
O
Control
knob
To choose a power level other than HI, from
the HI setting, touch and hold, or tap, the
arrow pointing to HI and the power level will
decrease. Stop when you reach the desired
level. Follow the same procedure from LO to
increase the power level.
To turn heating elements off individually,
touch ON/OFF. To turn all elements off at
once, touch ALL OFF.
NOTE: Heating elements will be visible (glow)
only at or above power levels 7 or 8.
To lock controls, touch CONTROL LOCK
and hold for 5 seconds. A tone will sound and
the lock light will go on. To unlock, repeat
above and lock light will go off.
Models KECC508G, YKECC508G,
KECC568G and YKECC568G are equipped
with a control cooling fan. The fan operates
when the cooktop is in use. The fan may
continue to run for a short period of time after
the cooktop is turned off.
Surface unit markers (All Models)
The shape and location of the Surface Unit
Markers match the shape and location of
the surface units that the control knob or
the touch control operates.
Power on light
Models KECC501G, KECC502G,
YKECC502G, KECC507G, YKECC507G,
YKECC562G, KECC567G, YKECC567G:
These models have a separate Power
On Light.
Models KECC508G, KECC568G,
YKECC568G: These electronic touch
control models have a common Power On
Light. Power levels LO through HI also act
as Power On Indicator Lights.
wWARNING
Fire Hazard
Turn off all controls when done
cooking.
Failure to do so can result in death
or fire.
LO
HI
2
3
4
6
7
8
MED
ON
OFF
HOT
3191524ENv10c32 7/6/98 4:36 PM Page 7