Filter
Top Products
16
To clean the burners:
1. Pull the burner caps straight up from the
burner base.
2. Clean the burner caps with warm, soapy water and
a sponge. You can also clean the caps with
a mildly abrasive plastic scrubbing pad and pow-
dered cleanser. Do not clean the burner caps in a
dishwasher or self-cleaning oven.
3. If the gas tube opening has become soiled or
clogged, use a cotton swab or a soft cloth to clean
the area.
4. If the ports are clogged, clean them with a
straight pin. Do not
enlarge or distort the
port. Do not use a
wooden toothpick.
If the burner needs to
be adjusted, call a
qualified technician for
service.
6. Turn on the burner to see if it will light. If the
burner does not light after you have cleaned it,
contact an authorized KitchenAid service techni-
cian. Do not service the sealed burner yourself.
5. After cleaning the gas tube opening and ports,
replace the burner
caps. To replace the
burner caps, make
sure the alignment
pins on the burner
base are properly
aligned with the cap.
Caring for Your Cooktop
Sealed surface burners and cooktop (cont.)