Filter
Top Products
13
Control knobs
1. Make sure all control knobs are turned to
OFF.
2. Pull the control knobs straight off.
3. Wash control knobs with sponge and
warm, soapy water. Rinse well and dry
with a soft cloth. Do not soak.
4. Replace control knobs by pushing them
firmly into place.
NOTES:
• When cleaning, never use steel wool,
abrasives, or commercial oven cleaners
which may damage the finish. After
cleaning, make sure all control knobs
point to OFF.
Tempered glass surface
1. Wipe with sponge and warm, soapy water
or paper towel and mild glass cleaner.
2. Dry with a soft cloth.
3. If soap or detergent solutions are used,
make sure to rinse thoroughly to prevent
filmy residue.
NOTE: When cleaning cooktop with knobs
removed, DO NOT allow water to run down
inside unit. When cleaning, never use steel
wool, abrasives, or commercial oven cleaners
which may damage the finish.
OFF
LO
2
3
4
5
Page
The cast-iron surface units ..............14
Cleaning chart ....................................15
Caring for Your Electric Cast-Iron Surface Unit Cooktop
Care
In This Section
Page
Control knobs ..................................13
Tempered glass surface ..................13
Your cooktop is designed for easy care.
You can do most cleaning with items found
around your home. Clean your cooktop
whenever spills or soiling occurs to help
keep it looking and operating like new.
NOTE: Let cooktop cool before cleaning.
• To prevent moisture from collecting in
control area, do not remove seals under
control knobs. Wipe up spills in control
area as soon as they occur.
4454944v11c46 8/25/98 2:58 PM Page 13