KitchenAid KMT411 Toaster User Manual


 
8
TOASTER CARE
1. Unplug the toaster and let it cool before
cleaning.
2. Press and release the center of the
crumb tray then slide it out. Shake the
crumbs into a waste container. It is
recommended that the crumb tray be
emptied after each use. The crumb tray
is top rack dishwasher safe.
IMPORTANT: The tray will be hot
immediately following a toasting cycle.
3. Wipe toaster with a soft, damp cotton
cloth. Do not use paper towels, abrasive
cleansers or liquid cleaning products.
Do not immerse toaster in water.
NOTE: If grease or oil splatters on the
toaster, wipe splatters away immediately
using a clean, damp cotton cloth.
4. Return crumb tray to toaster. Press it in
firmly until it clicks into position. Do not
use the toaster without the crumb tray in
proper position.
NOTE: KitchenAid does not recommend
the use of a toaster cover.
TROUBLESHOOTING
If your toaster should fail to operate,
check the following:
Check that the toaster is plugged into a
proper electrical outlet. If it is, unplug the
toaster.
Plug in toaster.
If the toaster still does not work,
check the household fuse or circuit
breaker.
If the problem cannot be corrected:
See the KitchenAid warranty and service
sections. Do not return the toaster to the
retailer; retailers do not provide service.
Electrical Shock Hazard
Plug into a grounded 3 prong
outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions
can result in death, fire, or
electrical shock.
WARNING