KitchenAid KSM8990ER Mixer User Manual


 
8
Using the Pouring Shield*
Attaching the Pouring Shield*
1. Make sure the speed control
lever is set to OFF.
2. Unplug the Stand Mixer or disconnect
power.
3. Attach desired accessory and raise the
mixing bowl.
4. Slide pouring shield collar
around beater shaft, centering collar
over rim of bowl.
Using the Pouring Shield
Pour ingredients into the mixing bowl
through the chute portion of shield.
Important: Make sure the guides on the
bottom of the chute rest on the rim of
the bowl to keep ingredients from falling
outside the bowl as they are added.
Removing the Pouring Shield
1. Make sure the speed control
lever is set to OFF.
2. Unplug the Stand Mixer or
disconnect power.
3. Remove pouring chute from collar.
4. Slide pouring shield collar off bowl.
5. Lower the bowl support by turning the
bowl-lift lever clockwise.
6. Remove accessory and the
mixing bowl.
Cleaning the Pouring Shield
Wash in warm sudsy water. If you wish
you may place on the top rack of your
dishwasher.
Solid State Speed Contr
ol
KitchenAid
St.
Joseph, Michigan USA
Of
f Stir 2 4 6 8 10
C
A
U
T
I
O
N
:
U
n
p
l
u
g
b
e
f
o
r
e
i
n
s
e
r
t
i
n
g
o
f
r
e
m
o
v
i
n
g
p
a
r
t
s
Pouring
Chute
* If Pouring Shield is included. Pouring shield
may be purchased separately.