Filter
Top Products
Removing the base grille
To remove base grille:
1. Open both doors.
2. Pull base grille forward to release the
support tabs from the metal clips.
3. Do not remove Tech Sheet fastened
behlnd the base grllle,
To replace base grille:
1. Line up base grille support tabs with metal
clips.
2. Push base grille firmly to snap Into place.
3. Close the doors.
See cleaning Instructionsfor defrost pan and
condenser coils on page 22.
Metal clips
Condenser coils
I
B_
Defrost pan
Support labs
Removing the defrost pan
Personal InjuryHazard
Refrigeration system tubes are located
above the defrost pan and can become
hot. Remove and Install defrost pan
carefully.
Failure to do so could result In personal
Injury.
To remove defrost pan:
I. Remove base grille. (See above.)
2. Liftdefrost pan over wire brace. Remove
tape, If any.
3. Clean as described on page 22.
To replace defrostpan:
I. Replace pan with notched corner to the
rear.
2. Pushdefrostpan Inalltheway. Make sure
thedefrostdralntube IsdirectedInto
defrostpan.
3.Replace base grille.(Seeabove.)
18