Filter
Top Products
7
Loading the Top Rack
The top rack is designed for cups, glasses, and smaller
items. (See recommended loading patterns shown.)
NOTE: The features on your dishwasher rack may vary
from the drawings shown.
10 place setting load
■ Place items so open ends face down for cleaning and
draining.
■ Load glasses and cups in top rack only. The bottom
rack is not designed for glasses and cups. Damage can
occur.
12 place setting load
■ Place cups and glasses in the rows between prongs.
Placing them over the prongs can lead to breakage.
Cup and glass load
■ China, crystal, and other delicate items must not touch
each other during dishwasher operation. Damage may
occur.
■ Load plastic items in the top rack only. Only plastic
items marked “dishwasher safe” are recommended.
■ Load plastic items so the force of the spray does not
move them during the cycle.
■ To avoid chipping, do not let stemware touch other
items.
■ Small bowls, pans, and other utensils can be placed in
the top rack. Load bowls in the center section for best
stability.
Cup shelf
Fold down the extra shelf on the right side of the top rack
to hold additional cups, or long items such as utensils and
spatulas.
Stemware holders
Use the stemware holders (attached to the cup shelf) to
keep water goblets, wine glasses, etc., in place and
prevent damage during washing.
Light item clips (on some models)
The light-item clips hold lightweight plastic items like cups,
lids, or bowls in place during washing. You can move a clip
anywhere in the rack.
To move a clip
1. Pull the clip up and off the tine.
2. Reposition the clip on another tine.