KitchenAid RVSA Mixer User Manual


 
3
TO ATTACH:
Before attaching accessory, turn off
and unplug unit.
Loosen attachment knob (1) by turn-
ing it counterclockwise. Remove
attachment hub cover. Insert attach-
ment shaft housing (2) into attachment
hub (3) making certain that attach-
ment power shaft fits into square hub
socket. Rotate attachment back and
forth if necessary. When attachment
is in proper position, the pin on the
attachment will fit into the notch on
the hub rim. Tighten attachment knob
until attachment is completely
secured to mixer.
ķĸ
2
3
1
TO ASSEMBLE:
Attach shaft (A) to desired cone (B).
Insert square end of shaft in square
opening of housing and tighten by
turning cone clockwise. Reverse to
remove. Insert the cone assembly into
housing (C) so shaft fits into square
hub socket. As you insert the cone
assembly, lift up on the latch (D) and
turn the cone assembly until it fits
squarely in the attachment hub.
A
B
Food Pusher
Housing
Shaft
Fine Shredder
Coarse Shredder
Thick Slicer
Thin Slicer
C
D