Filter
Top Products
12
Canceling a Cycle
To end a wash cycle in mid-cycle, press the Power button.
Any water in the drawer will be pumped out.
Pausing a Cycle
To pause the drawer during its wash cycle, press START/
RESUME and wait for 3 beeps before opening.
Restart by pressing START/RESUME.
IMPORTANT: Forcing the drawer open in mid-cycle may cause
damage to the dishwasher.
NOTE: If the drawer is operating and a power failure occurs, it
will stop. The drawer may not be opened during this time. When
the power supply resumes, the drawer will restart in the same
part of the wash cycle.
Changing a Cycle or Setting
1. Press the Power button to end the current cycle. Wait for the
drawer to drain.
2. When the draining stops, open the drawer.
3. Press the desired wash cycle button to select the desired
wash cycle. The lighted indicators will progress until the
desired cycle is selected.
4. Check the detergent dispensers. They must be filled properly
for the new cycle. (See “Detergent Use.”)
5. Close the drawer.
6. Press START/RESUME.
Adding Items During a Cycle
You can add an item anytime before the main wash starts. Open
the drawer and check the detergent amount. If the detergent is
still visible, you can add items.
To add items