Filter
Top Products
12
Option 4: No waste disposer, no drain air gap
NOTE: Attach the drain hose connector to the water waste
line using the supplied hose clamp.
6. Turn on water and check for leaks.
Install Drawer and Trim Pieces
1. Feed hoses and wiring into the cabinet while sliding the
drawer into position.
2. Keep the drawer pulled out about 6" (15.2 cm).
3. Place the trim strips on both sides as shown.
4. Slide drawer into position.
A. Drain hose connector
B. Waste
B
A
6"
(15.2 cm)