Filter
Top Products
4
Custom Panel Dimensions
If you plan to install a custom overlay panel, you will need to
make the panel yourself or consult a qualified cabinetmaker or
carpenter.
IMPORTANT:
■ The thickness of the overlay panel must be ³⁄₄" (1.91 cm).
■ Overlay panel must not weigh more than 8 lbs (3.62 kg).
■ Overlay panels weighing more than recommended may
cause damage to your ice maker.
■ Match wood grain direction with that of adjacent cabinets.
■ Sand panel edges to provide a smooth finish.
■ Use moisture sealer on both sides and all edges of the panel
to avoid damage from moisture.
Option 1—Without Hinge-Side Spacer
To allow proper clearance for the door, prepare the custom
overlay panel using the dimensions shown.
Option 2—With Hinge-Side Spacer
To achieve a flush installation with adjacent cabinets, prepare the
custom overlay panel using the dimensions shown.
Front of Panel
Top of Panel
Bottom of Panel
29
¹⁄₂
"
(74.9 cm)
14¹⁷
⁄₃₂
"
(36.9 cm)
¹⁄₄"
(6.35 mm)
1¹⁄₄"
(3.18 cm)
³⁄₄"
(1.91 cm)
¹⁄₄"
(6.35 mm)
1¹⁄₄"
(3.18 cm)
³⁄₄"
(1.91 cm)
A. Front—visible surface when installed
B.Hinge side
C.Notch to a depth of
³⁄₈
" (0.95 cm)
A. Front—visible surface when installed
B.Hinge side
C. Notch to a depth of
³⁄₈
" (0.95 cm)
14
⁵⁄₈
"
(37.1 cm)
29
¹⁄₂
"
(74.9 cm)
³⁄₈
"
(0.95 cm)
³⁄₈
"
(0.95 cm)
1¹⁄₄"
(3.18 cm)
¹⁄₂"
(1.27 cm)
A B C
1¹⁄₄"
(3.18 cm)
¹⁄₂"
(1.27 cm)
A
B
C