Filter
Top Products
8
OPTION SELECTIONS
OPTIONS CAN BE
SELECTED WITH
WHAT IT DOES ADDED TIME TO
CYCLE
ADDED
WATER
GALLONS
(LITERS)
TYPICAL MAX
Cleans pans, casseroles,
etc., with tough food soil to
eliminate the need for
soaking and scrubbing of
dirty, baked-on dishes.
Heavy Duty
Normal Wash
Activates the
ProScrub
®
spray
jets to provide
intensified cleaning
power to items at
the back of the
lower rack.
45 85 0 - 1.6
(0 - 6)
Raises the main wash
temperature to improve
cleaning for loads
containing tough, baked-on
food.
Heavy Duty
Normal Wash
Raises the main
wash temperature
from 105°F (41°C)
to 145°F (63°C) and
the final rinse from
130°F (54°C) to
140°F (60°C).
45 85 0 - 1.6
(0 - 6)
Sanitizes dishes and
glassware in accordance
with National Sanitation
Foundation (NSF)/ANSI
Standard 184 for Residential
Dishwashers. Certified
residential dishwashers are
not intended for licensed
food establishments. The
Sani indicator indicates at
the end of the cycle whether
the Sani Rinse option was
successfully completed. If
the indicator is not
activated, it is probably due
to the cycle being
interrupted.
Heavy Duty
Normal Wash
Increases the main
wash temperature
from 105°F (41°C)
to 145°F (63°C) and
the final rinse from
140°F (60°C) to
155°F (68°C).
60 105 0 - 1.6
(0 - 6)
Dries dishes with heat. This
option with the use of rinse
aid will provide the best
drying performance. Plastic
items are less likely to
deform when loaded in the
top rack. Turn Heat Dry off
for an air dry.
Available with any
cycle except Rinse
Only
Activates the
heating element at
the end of the wash
cycle to speed
drying times. Heat
Dry defaults to ON
when any cycle is
selected except for
1 Hour Wash.
52 52 0
Runs the dishwasher at a
later time or during off-peak
electrical hours. Select a
wash cycle and options.
Press 4 HOUR DELAY. Press
START/RESUME. Close the
door firmly.
NOTE: Anytime the door is
opened (such as, to add a
dish), the Start/Resume
button must be pressed
again to resume the delay
countdown.
Available with any
cycle
Delays the start of a
cycle up to 4 hours
.
240 240 0
Control Lock Avoids unintended use of the dishwasher between cycles, or cycle and option changes during a cycle.
To turn on Control Lock, press and hold for 3 seconds. The Control Lock light will stay on for a short time, indicating
that it is activated, and all buttons are disabled. If you press any button while your dishwasher is locked, the light
flashes 3 times. The dishwasher door can still be opened/closed while the controls are locked.
NOTE: You may need to disable Sleep Mode by pressing either START/RESUME or CANCEL, or by opening and
closing the door before you are able to turn Control Lock off.
To turn off Control Lock, press and hold for 3 seconds. The light turns off.