Filter
Top Products
7
12. Test the operation of the hood before moving on to next step. Make sure power is
supplied to the hood.
Duct Cover Installation
13. Using Table 1 and measurements on page 12 for references, mark the leveling point for
duct cover-mounting bracket.
14. Secure the duct cover-mounting bracket to the wall with two screws (not provided). Refer
to Figure 10. Make sure all screws are tightened.
15. Hook the inner duct cover onto the duct cover-mounting bracket and release the outer
duct cover to fit onto the hood as shown on Figure 11.
Figure 10 Figure 11
Final Assembly
16. Turn power ON in control panel. Check all lights and blower operation.
17. Make sure to leave this manual for the homeowner.