Kobe Range Hoods IN-026 SERIES Ventilation Hood User Manual


 
10
= Low Speed
= Medium Speed
= High Speed
Auto Control
Press Auto Control to set the hood on auto sensor. When gas or fluctuating temperature* is
detected, hood will automatically turn ON. Fan will turn to its highest speed and will turn
OFF until gas is eliminated and temperature is reduced down to room temperature.
(*Temperature: Higher than normal room temperature.)
Output Display:
Light Control
(Lights are control separately from ON/OFF control. Turning power off will not turn lights off.)
Press Light control to turn lights ON.
(Each press of Light Control will cycle the light intensity through high, low, and off.)
Timer Control
Press Timer Control to start timer.
Each press of Timer Control will increase by 1 minute on the display.
When Timer Control is pressed, fan will automatically shut off after set time. Timer range from 1
min. to 99 mins.
To clear the timer, press Timer Control twice.
Baffle Change Indicator
The display will indicate
when baffle filter needs cleaning.
Remove to clean the baffle filter.
(To purchase replacement filters, please contact your local KOBE dealer or call 626-350-1355)