Filter
Top Products
7
10. Slide glass canopy onto the blower system.
Secure glass on the top of range hood with
4 (M5 x 20) screws and 4 washers
(provided). (Figure 5)
11. Slide duct cover onto the blower unit,
secure underneath the blower unit with 4
(M8) nuts and 4 washers (provided). Refer
to Figure 6 and 7.
12. Carefully slide stainless steel collar through
duct cover to the top of glass carefully.
Refer to Figure 8.
13. With assistance, align the duct cover to the
mounting bracket and secure with 5 (M5 x
10) screws (provided). Refer to Figure 9.
Important: Make sure the hood
orientation is correct before securing the
hood.
14. Slide stainless steel collar towards the top
of the duct cover. Refer to Figure 10.
15. Lock stainless steel collar to left or right to
secure the stainless steel collar.
16. Peel protective film off the stainless steel
collar.
17. Place stainless steel filter in place.
Final Assembly
18. Turn power ON and check all lights and fan
operation.
19. Make sure to leave this manual for the
homeowner.
Figure 7
Figure 8
Figure 9
Figure 10
Duct Cover Installation