Filter
Top Products
- 3 -
Using the appliance safely:
• In the event of danger, immediately remove the
power plug from the wall socket.
• Never use the appliance for purposes other than
those for which it was designed.
• Remove the power plug from the wall socket
when the appliance is not in use, when you re-
move parts and before cleaning the appliance.
• Do not use the appliance outdoors.
Appliance description
q
Lid
w
Large squeezing cone
e
Small squeezing cone
r
Upper fruit pulp sieve
t
Fruit pulp regulator
y
Lower fruit pulp sieve
u
Juice collector
i
Drive axle
o
Power cable with power plug
a
Appliance plinth
s
Power cable storage
Set-up and assembly of the
appliance
Important:
Ensure that the power plug is not in the power
socket before assembling the appliance. Otherwise
there is a risk that the appliance could start
unintentionally.
1. Unwind the power cable
o
completely from the
cable storage
s
and secure it in the lateral
recess on the appliance plinth
a
.
2. Place the appliance plinth
a
on a level and
slipfree surface.
Note:
Rinse all removable components thoroughly before
the first usage of the appliance (see chapter
"Cleaning and care").
3. Place the juice collector
u
on the drive axle
i
of the appliance plinth
a
and turn it clockwise
as far as it will go.
4. Place both parts of the fruit pulp sieve
r
/
y
into each other so that the fruit pulp regulator
t
protrudes through the recess. Both parts must
audibly engage.
5. Place the assembled fruit pulp sieve
r
/
y
on
the juice collector
u
. The fruit pulp regulator
t
must lie on the grip and catch in the rabbet on
the grip.
6. Press the small squeezing cone
e
on the drive
axle
i
so that it engages.
Note:
If you want to press oranges or other larger fruits,
place the large squeezing cone
w
over the small
squeezing cone
e
. Ensure that the lobes of the
small squeezing cone
e
engage in the recesses of
the large squeezing cone
w
.
7. Insert the power plug into a wall power socket.
The appliance is now ready for use.
IB_KH25_E23697_LB6 02.07.2008 11:23 Uhr Seite 3