Filter
Top Products
- 2 -
HAND BLENDER KH 498
Technical data
Mains voltage: 220–240V
~
50/60Hz
Rated output: 300W
Protection class: II
CO Time: 1 Minute
CO Time
The CO Time (Continuous Operation Time) details
how long an appliance can be operated without
the motor overheating and becoming damaged.
After the appliance has run for this period it must be
switched off until the motor has cooled itself down.
Capacity
Measuring cup: 500ml
Max. capacity: 300ml
Description of appliance/
attachments
1
Switch (Standard Speed)
2
Turbo-Switch (High Speed)
3
Motor unit
4
Hand blender
5
Bowl lid
6
Knife
7
Bowl
8
Whisk holder
9
Whisk
0
Measuring cup lid
q
Measuring cup (Capacity – max. 500ml)
w
Wall bracket incl. screws & plugs
Safety instructions
Danger of electric shock!
• Only connect the hand blender to correctly
installed wall sockets having a mains current
of 220–240V at 50/60Hz.
• Unplug the hand blender from the socket if
you notice any faulty operation and when
you decide to clean it.
Under no circumstances may the motor unit
be immersed in liquids, or liquids be permit-
ted to permeate into the motor unit housing.
• Do not expose the appliance to humidity and
do not use it outdoors.
• Should liquids nonetheless gain entry into the
appliance housing, immediately unplug the
appliance from the mains and arrange for it
to be repaired by qualified specialists.
• Never touch the hand blender, power cable
or plug with wet hands.
• To unplug the appliance, always pull the plug
from the socket, do not pull the cord itself.
• Do not crease or crimp the power cable and
place it in such a way as to prevent anyone
from stepping on or tripping over it.
• Arrange for defective power plugs and/or
cables to be replaced as soon as possible
by a qualified technician or by our Customer
Service Department to avoid the risk of injury.
• You may not open the motor unit housing
of the hand blender. In such an event, safety
is not guaranteed and the warranty shall
become void.
IB_KH498_E3339_GB_LB3-6 05.03.2008 12:28 Uhr Seite 2