Filter
Top Products
- 20 -
Making coffee
• Open the lid
w
.
• Using the measuring spoon, place coffee powder
(coarse to medium ground) into the filter
q
.
A level measuring spoon of coffee approximates
to ca. 6 gr of coffee powder.
NNoottee::
Should you use finely ground coffee powder it
could block the filter
q
, water can no longer flow
through it and the coffee maker could overflow!
• Fill the water tank
e
with the required amount
of water. For this, use the glass jug
l
with the
scale. When filling the appliance with water, never
exceed the MAX marking in the water tank
e
.
• Close the lid
w
.
NNoottee::
After brewing, there is always somewhat less coffee
in the glass jug
l
than the amount of water that
you filled the water tank
e
with. The coffee powder
absorbs some of the water.
• Place the glass jug
l
in the coffee maker.
• Press the button ON/AUTO/OFF
s
once.
The red indicator lamp
y
glows. The coffee maker
begins the brewing process.
• When the brewing process is complete, the coffee
is kept warm by the keep-warm plate
r
for two
hours. On the expiry of this period the coffee
maker switches itself.
• Should you wish to switch the coffee maker off
earlier, repeatedly press the button
ON/AUTO/OFF
s
until the indicator lamps
y
/
u
are extinguished.
Risk of scalding!
After the brewing process the coffee machine must
first cool down, for at least 10 minutes, before you
start another brew. If you do not, there is a risk of
being scalded by escaping steam!
Coffee servings
With this coffee maker you can fill a cup with coffee
using only one hand:
• When there is coffee in the glass jug
l
, press
and hold your cup against the coffee button
d
.
Coffee flows into the cup.
• When the cup is full, remove the cup from the
coffee button
d
.
• Any drips that might fall will be caught by the
driptray grill
f
.
NNoottee::
Empty the driptray below the driptray grill
f
regularly.
Otherwise it could overflow.
NNoottee::
If you pour coffee using the coffee button
d
, a
small amount of coffee will always be left in the
glass jug
l
.
You can also pour coffee from the glass jug
l
in
the usual manner:
• Lift the glass jug
l
and then pull it to the front.
Timer-Function
By use of the button PROG
a
, you can programme
the coffee maker so that it starts the brewing process at
a pre-determined time (Timer function). First, always
fill the filter
q
in the filter basket
1(
with coffee powder
and the water tank
e
with water. Place the glass
jug
l
in the coffee maker. Ensure that the glass jug
l
is empty and the water tank
e
is not filled beyond
the Max marking.
IB_KH1098_E2690_LB5 06.03.2008 10:31 Uhr Seite 20