Filter
Top Products
- 4 -
bifinett KH 1129
4. Toaster description
ᕡ Roll attachment
ᕢ Slide
ᕣ Crumb tray
ᕤ Toasting dial
ᕥ STOP button
5. Starting up
Before starting up the appliance, make
certain that ...
- toaster, plug and power cable are
in good working order and...
- all packaging materials have been
removed from the toaster.
➪ First clean the appliance as described
under 8.
Heat up the toaster a couple of times
to melt off any deposits on the heating
wires. This usually produces a certain
odour:
➪ Put the plug into the socket and
turn the toasting dial ᕤ to "7"
➪ Press the slide ᕢ down until it
locks into place.
The toaster heats up for a few minutes.
The slide springs up by itself and the
toaster switches off.
➪ Press the STOP button ᕥ to stop
heating early. The slide springs up by
itself and the toaster switches off.
Caution: Do not press the slide
upwards by hand. This may damage
the mechanism.
➪ Now pull the power plug out of
the socket and allow the appliance
to cool.
➪ Clean the appliance again as
described under 8.
6. Toasting
➪ Put the slices of bread into the slots.
➪ Turn the toasting dial ᕤ to the
desired setting and ...
➪ press the slide ᕢ downwards until
it locks into place.
As soon as the toast is done, the slide
springs up by itself and the toaster
switches off by itself.
➪ Press the STOP button ᕥ to stop
heating early. The slide springs up by
itself and the toaster switches off.
7. Toasting Rolls
➪ Attach the roll attachment ᕡ to the
toaster as shown.
➪ Now put your rolls on it and start
toasting as described under 6. Set
the toasting dial to maximum on
level 5-6.
➪ You can remove the roll attachment
as soon as it has cooled down.
KH1129_Toaster_UK 28.06.2006 16:28 Uhr Seite 4