Filter
Top Products
- 6 -
Because the device is equipped with a heat
maintenance function, the device automatically
begins reheating as soon as the water tempe-
rature falls below the set temperature.
The appliance heats until the desired tempera-
ture is reached. Make sure that the appliance
does not automatically switch on to the keep
warm function. Therefore, do not leave the
appliance unsupervised!
• As soon as the kettle
u
is lifted from the base
t
, the ON/OFF switch
e
jumps out and the
operating lights
r
switch off.
• In order to halt the heating process, push the
ON/OFF switch
e
up again. The operating
light
r
goes out then as well.
Avoid setting the temperature regulator
y
in
the transition range, as the water can start boi-
ling on account of varying filling levels.
ƽ
Warning: Pull the power plug from the
socket before lifting the kettle
u
from the
base
t
. This prevents any water
splashing out from contacting the electrical
connections in the base, which could cause
a short circuit.
For safety reasons, the lid should not be
opened while the water is boiling or is
very hot. Otherwise there is a risk of
injury.
Cleaning and Care
ƽ
Danger!: Do not open any part of the
housing. There are no operating elements
inside. An open housing can create the risk
of a life-threatening electrical shock.
Never submerse any parts of the device in
water or other liquids! This can create the
risk of a life-threatening electrical shock if
residual liquid comes into contact with
powered components.
Before cleaning the device, ....
• First pull the power plug out of the power socket
and let the device cool completely.
• Clean the exterior surfaces and the power cord
with a slighly damp cloth. Always dry the device
well before using it again.
• Never use any cleansers, abbrasive substances
or solvents. These can damage the device.
In the event of calcium deposits
• Purchase a decalcifying agent suitable for use
with food containers from a household goods
stores (e.g. coffee machine decalcifier).
• You can use a suitable product from a
specialised dealer for the stainless steel
container bottom.
Removing / replacing the spout screen
• Open the lid completely.
• Press down on the edge of the spout screen from
above in order to remove it toward the inside.
• Clean the spout screen
o
with a lightly
moistened wash cloth.
• After cleaning, insert the screen from above and
press it firmly into place.
Storage
Let the device cool completely before storing it.
• Wind the power cord around the holder on the
bottom of the device.
• Store the device in a dry place.
IB_KH1134_E1462_LB6 08.11.2007 10:16 Uhr Seite 6