Filter
Top Products
- 7 -
8. Programme Dough (kneading)
For the preparation of yeast dough for buns, pizza
or plaits. In this Programme no baking is done.
9. Programme Jam
For making jams, preserves, jellies and fruit spreads.
10. Programme Cake
In this programe the ingredients are kneaded, allowed
to rise and then baked. Use baking powder for this
programme.
11. Programme Bake
For the after-baking of breads that are not brown
enough, not baked through or ready-made dough.
All kneading and rising processes are dispensed
with in this programme. The bread is kept warm for
up to one hour after the baking process. This prevents
the bread from becoming too moist.
Programmme 11 bakes the bread for 60 minutes.
To terminate the programme "Bake" prematurely,
press the Start/Stop ả button until a long signal
tone is heard. To switch the appliance off, remove
the plug from the wall power socket.
Note:
The programme "Bake" does not allow itself to start
until the appliance has cooled itself down. Before
after-baking a loaf, wait until the appliance has cooled
itself down.
Functions of the Bread Baking
Machine
Signal tone function
The signal tone sounds
• on pressing all programme buttons,
• in the programmes 1 to 7 to give notice that
grains, fruits, nuts or other ingredients can now
be added,
• on reaching the end of the programme
• During the keep-warm phase, at the end of the
baking process, the signal tone sounds several
times in succession.
Repeat function
Should there be an electricity power cut of more
than 10 minutes the Bread Baking Machine must
be started anew. This is only practicable if the dough,
at the time of interruption in the programme process,
had not passed beyond the kneading process.
In all other cases, one must start again from the
beginning! With electricity power cuts of less than
10 minutes duration the programme continues itself
automatically from the appropriate position (see
chapter "Memory function").
Memory function
The programme is, with the switch-on after electricity
power cuts of less than ca. 10 minutes duration,
automatically continued from the same position.
This memory function is intended for power cuts.
Note:
Pressing the Start/Stop ả button terminates the
programme. The programme does not allow itself
to be continued.
IB_KH1172_E4980_LB6.qxd 20.06.2008 10:23 Uhr Seite 7