Filter
Top Products
- 6 -
Reassembling the filter
➩ Insert the lower part of the filter box with the
white seal
g
to the front.
➩ Place the exhaust supports onto the filter cover
such that the lugs
d
grasp into the depression
on the filter cover. For this, slide the lock
k
on
the exhaust supports to the right and press the
exhaust supports downwards. Check to ensure
that the exhaust supports
r
are now positioned
in the appliance as illustrated under
s
.
➩ Place the filter cover back on the filter box until
the clips
j
of the filter cover snap back in.
Cleaning the appliance
➩ Clean the appliance with a dry or lightly
moistened cloth only. Do not use abrasives
or detergents, these could damage the plastic
surfaces.
➩ Do not remove stubborn glue remnants from
the sealing wire
t
with hard or sharp objects,
at the very most carefully use a fingernail.
Otherwise the sealing wire and the isolation
below it could be damaged.
Maintenance
Warning:
NEVER open the housing! There is potentially fatal
high voltage in the appliance. Arrange for the
appliance to be repaired by specialists only.
The appliance is maintenance-free. No form of
maintenance, either on or in the appliance, is intended
for execution by the user. In the event of malfunction or
apparent damage, make contact with Customer Ser-
vices.
Disposal
Do not dispose of the appliance in your
normal domestic waste.
This appliance is subject to the European Guidelines
2002/96/EG.
Dispose of the appliance through an approved
disposal centre or at your community waste facility.
Observe the currently applicable regulations.
In case of doubt, please contact your waste disposal
centre.
Dispose of all packaging materials in an
environmentally friendly manner.
Importer
KOMPERNASS GMBH
BURGSTRASSE 21
D-44867 BOCHUM
www.kompernass.com
IB_KH1605_E2247_LB3 25.01.2008 12:53 Uhr Seite 6