- 3 -
Attention
:
In the event of a malfunction and when cleaning
the appliance, remove the power plug from the
wall socket. Risk of electrical shock!
• Loosen jammed slices of bread with a blunt wooden
object (e.g. a wooden spatula or spoon).
Do NOT touch the heater elements.
• Differences in bread sorts, moisture and the thickness
of individual slices influence the browning of the
toast. Therefore the bread for toasting should be
kept in sealed packaging until required.
Operating Elements
q
Bread roll holder
w
Toasting slots
e
Operating button
r
Stop button for interrupting the
toasting process
t
Button for the warm-up function
y
Button for the thaw function
u
Toasting dial
i
Crumb tray
o
Button for bread-roll attachment
Placement
• Unwrap the power cable from the cable winder
on the underside of the appliance.
• Place the toaster on a dry and level surface.
Before taking into use
Heat the appliance up at least five times, at the
maximum setting, without insertion of bread slices.
For details on cleaning the appliance read the
section "Cleaning and Care".
Please take note:
The operating button
e
only engages when the
power cable is connected to a power socket.
With the first usage a slight smell may occur (minimal
smoke development is also possible). This is normal
and dissipates after a short time. Please provide for
adequate ventilation.
Adjusting the browning level
The desired level of browning, from "light" (1) to
"dark" (7), can be selected with the toasting dial
u
.
Take note that, subject to the demand made
on the toaster, the level of browning can vary
somewhat with an unvarying adjustment of the
browning regulator
u
! The less the number of
slices inserted, the higher is the browning level.
Thus, if you are not intending to toast many slices,
always adjust the browning regulator
u
a little
lower.
Toasting
Attention
:
NEVER cover the toaster slots
w
when operating
the toaster! There is a risk of fire! The appliance
could become damaged!
• After setting the desired browning level, insert
the bread into the toaster slots
w
.
• Press the operating button
e
downwards. The
control lamp integrated into the stop button
r
glows.
IB_KH1909_46936_LB6 13.01.2010 12:12 Uhr Seite 3