- 5 -
KH 498
➩ Place the motor unit ᕣ on the lid ᕥ,
ensuring that it clicks in audibly.
Note: The arrows on the motor unit and
the accessory must stand one above the
other .
Operation
ƽ Warning: Foodstuffs should not be
too hot. Squirted-out contents may
cause scalding.
ƽ Fire Danger: Never exceed the maxi-
mum operating duration of 1 minute
for soft foodstuffs, respectively, 15
seconds for solid foodstuffs. Allow
the appliance to cool down for 2
minutes before switching it on again.
When you have assembled the hand
blender for your particular purpose,
place...
➩ The plug in the mains socket.
➩ Hold down the switch ᕡ to process
the foodstuffs at the standard speed.
➩ Hold down the turbo-switch ᕢ to
process the foodstuffs at the higher
speed.
➩ When you have completed processing
the foodstuffs, simply release the
switch.
Wall mounting
Included are 2 plugs and 2 screws to
enable the wall bracket ¹ to be assem-
bled. We recommend mounting the
appliance close to a power point
➩ Mark the position of drill holes using
the appliance holder.
➩ Insert the dowels into the drill holes.
➩ Position the openings of the wall
bracket over the bored holes, then
fix it using both screws.
Cleaning
ƽ Danger of electrical shock! Before
you clean the hand blender, unplug
the appliance from the power socket.
Under no circumstances may the
motor unit ᕣ be cleaned by immer-
sing it in water or holding it under
running water.
ƽ Danger of injuries! To prevent inju-
ries, exercise caution when handling
the extremely sharp blade ᕦ.
Reassemble the liquidiser after use
and cleaning to prevent injuries from
exposed knife blades. Keep the blade
out of the reach of children.
ƽ Attention! The attachments of the
hand blender may not be cleaned in
a dishwashing machine, this would
damage them.
KH498_IB_UK.qxd 07.04.2006 9:59 Uhr Seite 5