Filter
Top Products
- 3 -
• Do not allow individuals (including children) to
use the appliance whose physical, sensorial or
mental abilities or lack of experience and know-
ledge hinder their safe usage of it if they have
not previously been supervised or instructed in its
correct usage.
• Tell children about the appliance and its potenti-
al dangers so that they do not play with it.
Starting Up the Device
• Before starting up the device, make certain that...
– the device, plug and power cable are in good
working order and...
– all packaging materials have been removed
from the device.
• Fill the device with water up to the MAX mark
and let it come to a full boil once as described in
the next section. Pour out this water.
Boiling Water
ƽ
Danger! Never place the electrical base
near water – life-threatening danger!
ƽ
Warning: Pull the power plug from the
socket before lifting the kettle
u
from the
base
t
. This prevents any water
splashing out from contacting the electrical
connections in the base
t
, which could
cause a short circuit.
For safety reasons, the lid
q
should not
be opened while the water is boiling or is
very hot. Otherwise there is a risk of
injury.
You should only heat as much water as you need
directly. That helps you save electricity, water and
time:
• Lift away the kettle
u
for filling!
• Open the lid
q
by pressing down on the unlok-
king button
w
.
• Hold the kettle
u
vertically while filling. Only
then will the level indicator
i
on the side
correctly indicate the water volume.
Fill the kettle
u
...
– at least to the MIN mark so that the device does
not overheat,
– no higher than the MAX mark so that no boiling
water spills out.
• First close the lid
q
...
• then place the kettle
u
on the base
t
until it sits
straight on the base
t
.
• Set the desired water temperature using the
temperature control
y
.
To bring the water to a boil, you must set the
temperature controller
y
to the MAX position.
• Now insert the power plug into the power
socket and press the ON/OFF switch
e
down
until it snaps in.
• The operating light
r
indicates that the device is
now heating up.
Temperature regulator in the boiling range
• The devices switches off automatically and the
operating light
r
goes out as soon as the water
is at a full boil. The ON/OFF switch
e
springs
out.
MIN
MAX
k
e
e
p
w
a
r
m
r
a
n
g
e
b
o
i
l
i
n
g
r
a
n
g
e
Transition-
range
IB_56541_SWKT3000A1_LB6 24.08.2010 14:49 Uhr Seite 3