DS Vision® 3000 - Technical Specifications
13
5 Technical Specifications
RESOLUTION:
Up to 1920x1440 @60Hz (depending on cable length)
I/O VIDEO SIGNALS:
Analog red, green, blue, 75Ω 0.7Vpp
SYNC:
TTL compatible
HORIZONTAL/VERTICAL SYNC:
Positive/negative
SYSTEM CABLE:
CAT 5/5e/6/7 UTP/FTP cable, 2x4x24AWG solid wire
MAX. RANGE:
Receiver short: 110m (360ft),
Receiver long: 300m (1000ft),
Receiver long with line splitter long: 600m (2000ft)
(2 x 300m (1000ft))
SKEW COMPENSATION:
Up to 63nsec
DDC:
Complies with VESA DDC−2 specification
RS-232 CONNECTION:
Full serial: RXD, TXD, DTR, DSR, RTS, CTS
SERIAL BAUD RATE:
Up to 57600
AUDIO:
Stereo
Frequency response: 20 Hz to 20 kHz, +/-1 dB.
Signal-to-Noise Ratio (SNR): 80 dBA.
Total Harmonic Distortion and Noise (THD+N):
0.017%.
Stereo crosstalk: -70 dB.
Input impedance: 10kΩ.
Line level output; supports multimedia speakers.
Maximum I/O levels: 3.1Vpp (line level).
SERIAL:
Broadcaster / Transmitter – DCE
Receivers - DTE
OPERATING TEMPERATURE:
5°C to 40°C (41°F to 104°F)
STORAGE TEMPERATURE:
−40°C to 70°C (−104°F to 158°F)
WARRANTY:
3 years
Specifications are subject to change without notice at http://www.kramerelectronics.com