Filter
Top Products
9
Description
a Lid
b Water Tank
c Pivoting filter holder
d Flavor Release Technology holder
e Thermal coffee carafe with lid
f Thermal carafe base
g Water level indicator
h On/Off indicator switch (#197)
i Cord storage
Timer Models (#199 & #229)
j Hour setting control
k Minute setting control
l On/Off Indicator light
m Rotating selector switch
The benefits of the Aroma-
Control Therm coffee maker
Exclusive Flavor Release Technology
- Releases the full aroma of the coffee
through a new brewing innovation:
At the beginning of the brewing cycle, the
‘Flavor Release’ mechanism remains closed so
as to keep the hot water in contact with the
ground coffee for a longer period of time and
thus obtain the maximum flavor from your
coffee.
After about 1 - 2 minutes of brewing, the
coffee is released and flows into the coffee
carafe.
The KRUPS exclusive Flavor Release
Technology thus guarantees you optimal
contact between water and ground coffee
and the ideal time for brewing, particularly for
small quantities.
Thanks to the KRUPS exclusive technology,
your coffee will have a fuller, richer aroma and
a delicious taste.
- Lid for thermal coffee carafe
When the thermal coffee carafe is inserted in
the coffee maker, the middle of the lid retracts
to let the coffee filter through while the lid
remains tightly screwed on the carafe to retain
heat.
When the brewing process is complete, the
specially designed sealing system keeps coffee
fresh and warm for up to five hours. To pour
your freshly brewed coffee, the lid only needs
to be turned a half of a revolution
counterclockwise, not removed.
‘Stop ‘n Serve’ Feature
Lets you pour a cup or two while brewing.
The automatic filter seal will allow you to
remove the carafe for 20 seconds without
dripping coffee onto the thermal carafe base.
Note: KRUPS AromaControl will shut off
automatically after the brewing is complete
for added safety.
Before first use
Setting the time (models 199 & 229)
• Plug in the KRUPS “AromaControl Therm
Time”. Make sure the rotating selector (m)
switch is in the “off” position.
The LCD display will be flashing intermittently.
This is your signal to set the digital clock.
• Turn the selector switch to position
(m).
Set the hours and minutes by pressing the
“h” and “min” buttons respectively.
The time is now set.
Running with water only
• Before first use, cycle the appliance once or
twice with water (without coffee) to help
remove any factory sediment.
• Open the lid (1).
• Fill the water tank with cold water (2).
The water level indicator (g) of the water tank
is measured in cups of water.
• Close the lid.
• Turn the machine ‘on’ to begin (position (h)
for #197, position (m) for #199 & #229).
The indicator light will illuminate.
Please note: Your AromaControl coffee
maker is fitted with a Flavor Release filter
holder (exclusive to KRUPS).