Krups XP2000 Coffeemaker User Manual


 
Place the water container back into the machine by positioning it firmly in the water
container compartment (3) and close the lid.
Turn on the machine by pressing button (N) (4). The pump will work for 2 seconds to
fill the system with hot water for a cup of hot coffee from the start.
As soon as the appliance reaches the right temperature, the orange temperature control
light switches off (P).
Your espresso maker is equipped with three filters designed for 1 cup, or for 2
cups of espresso using ground coffee, or for E.S.E. (Easy Serving Espresso) pods.
The first is in the filter holder (I), the other two are found in the appliance’s
transport packaging.
Choose the filter that you wish to use and place it in the filter holder (5). Store the
2 others in the espresso lid (A).
Then place the filter holder under the appliance’s brewing head. To ensure that the filter
holder is in the correct position, turn the handle so it points to the left at a 45 degree
angle (6), place the filter holder flat against the brewing head, then turn the handle
towards the right (7) as far as it can go.
9 KRUPS
Espresso
1
2
Espresso
3
CafféEspresso
4
5
XP 2000 US.qxd 28/06/06 10:56 Page 9